Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It's discreet, does not use LED indicators or key fobs, and is concealed in the vehicle's wiring.
It also allows users to turn off the system temporarily through Transport Mode to use it when they are renting out their vehicle. This guide will walk you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a PIN code that you choose. It's undetectable to thieves using scanners for diagnostics or other modern methods, and it is unable to be disabled by circuit cuts.
The system is easy to use, but professional installation is advised to ensure a perfect connection to the ECU of your vehicle. A certified installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest a tracking system or alarm system to complete the protection package for your vehicle.
First, the installer needs to disconnect the battery to prevent the possibility of airbag deployment and short circuits. After that the installer is able to safely begin work. Basic hand tools can be used for precise connections. A multimeter is useful to verify electrical values. Insulation tape and cable ties are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model.
It is crucial to select a grounding location that is free of any paint or debris during installation. Installers should also ensure that the immobiliser's wires CAN H and can L are connected to the proper ECU ports. The wires can be plugged in or soldered depending on the model. To ensure a reliable and durable connection it is recommended that you choose a high-quality plug.
Transport Mode can be turned on by the customer once the installation is complete. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. To accomplish this, the user must hit the service button on the dashboard 5 times in a matter of 2 seconds. After this is done the system will verify by displaying 5 signals.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's a great option for anyone who regularly rents their vehicle on platforms like Turo. Having an immobiliser can also lower insurance costs, as it significantly decreases the risk of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. It prevents your car from starting if someone steals or copies your key. This is due to its advanced technology, which is designed to prevent the engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN which allows direct communication with the ECU. It uses existing buttons on the dashboard and wheel to create a unique sequence that only you know, making it impossible for others to start your vehicle. This is the ultimate system to protect your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing ghost immobiliser car from Ghost is simple, but you must follow the instructions to avoid electrical problems and malfunctions in the system. First, you must find and locate a permanent 12V power source as well as a good grounding point on the chassis of your vehicle. After that, you can begin connecting the wires that will be used to activate the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a solid connection. Also, make sure to protect the connections by insulating them with heat shrink tubing and insulation tape to shield them from short circuits in electrical power and other problems.
After the wires are connected, you can plug in the battery and start the engine to determine whether the immobiliser works. Once you have verified that everything is functioning properly and you are satisfied, you can place the immobiliser in a secure location in the vehicle. Make sure to hide it well to prevent a thief from tampering with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it's a top-quality deterrent for car thieves. It provides superior protection against key cloning, hacking and relay attacks, and cannot be disabled without knowing the code. The device is simple to use, and can be set into a service valet setting so that your vehicle won't be activated if you bring it for an MOT or service.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus and communicates with the ECU, making it a virtually undetectable addition to your car. Unlike other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with the factory settings of your vehicle.
It's also completely undetectable to thieves using diagnostic scanning devices. ghost immobiliser car is due to the fact that it does not transmit and receive radio frequency signals, and it uses the CAN data format to communicate with your ECU. It also doesn't require modifications to your current key fobs.
To use the Ghost Immobiliser, simply switch on the ignition of your car and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. Once you've verified this, you're able to start your vehicle and drive off with peace of mind.
Once installed The Ghost Immobiliser can secure your vehicle from key cloning and hacking and will also protect the value of your car's pride and joy. If you ever need to surrender your vehicle to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need to locate an energy source that is constant (12V) and a grounding point. Be sure that both are well-insulated and able to be touched. It's also recommended to use cable ties to bundle and secure the wires. This will decrease the chance of theft by thieves. Be sure to double-check the location of these points to avoid committing a mistake, and mark them with an adhesive or label. Verify all connections for signs they're wearing out. Loose connections can lead to problems with the system, so be sure that they're firmly in place and securely insulated. Finally, don't forget to test the Ghost Immobiliser after the installation is complete. This will ensure that the unit is operating correctly and that all connections are secure and insulated. If there are any issues, you must be sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that integrates seamlessly into your vehicle's ECU to stop unauthorized engine start. Its cutting-edge technology protects your vehicle from key cloning and hacking and other common methods employed by thieves to steal cars. The Ghost is also able to work in conjunction with other alarm and tracking systems to provide the best protection for your vehicle. This system's unmatched features and secluded design make it a popular choice for car enthusiasts and security-conscious drivers alike.
It is essential to follow the steps of installation to ensure the correct integration of the Ghost Immobiliser. Check the wiring diagram of the vehicle as it will help you locate and connect the wires. The next step is to determine the power and grounding sources. Once you've found them you'll need to mark them so that they are easy to locate when installing. It's essential to use high-quality materials and tools. Basic hand tools can help in making connections that are precise, while a multimeter will check electrical values and ensure security. Cable ties and insulation tape will help keep all connections tidy and neat. Finally, a user manual will give specific guidelines specifically tailored to your Ghost model.
Before beginning the installation, it's important to test the system by entering the PIN code, then starting the vehicle. This step will confirm that the immobiliser works according to plan, and prevents unauthorised vehicle starts. immobiliser ghost should be carried out regularly as part your regular inspections of the vehicle to ensure that the system is always functioning properly.
After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will safeguard your vehicle from potential car thieves. It will ensure that no one is able to escape with your car without having the correct PIN code. The Ghost can be paired with an approved Thatcham tracker, which detects attempts to steal or tamper with. This will allow you to track your car in the event that it's stolen.
The Ghost can be utilized on a variety of vehicles and is compatible with all major brands. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA Registered installer which guarantees that we adhere to the strictest standards and procedures for installing our products. This assures insurance companies, customers and law enforcement officials that all installations are performed safely and correctly.