The Ghost Immobiliser
Immobilisers are a potent tool in the fight against vehicle theft. They prevent the vehicle from starting if it isn't equipped with an ignition key fob. They also help to stop hotwiring or other traditional methods of vehicle theft. Modern methods such as key cloning and relay theft are becoming increasingly common.
Created to counter these current trends The ghost immobiliser is designed to make your vehicle completely unnoticeable. It is silent and stealthy and does not rely on radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network in your vehicle to stop key theft and cloning. It is a TASSA-approved product and insurance companies have endorsed it. It operates quietly and is virtually unnoticeable to thieves. It uses buttons on your steering wheel as well as the centre console to create unique pin-code codes that you have to enter before you can start your car. You can create up to 20 different sequences to increase security. The system is simple to install and does not require any additional wiring or hardware.
It is recommended that you use an accredited immobiliser CAN installer who is specialized in the specific type of vehicle you have to ensure the best results. Idealy, they should have a workshop close to you where you can visit to complete your installation. They'll also have a variety tools and materials to assist you during the installation process. They will provide basic hand tools, multimeters insulation tape and heat shrink tubing to protect the connections. A user manual will give you instructions for your vehicle's wiring.
Remove the battery prior to starting the installation to avoid short circuits or airbag deployment. It is crucial to confirm the exact location of the CAN H and CAN L wires as an incorrect identification could result in unintentional system integration. It is recommended to mark the wires using small bits of tape or label them with labels. Also, make use of a multimeter to confirm that the identified power source provides a consistent 12V supply.
Advanced thieves can use various tactics to bypass Ghost Immobilisers. This includes jamming or spoofing. These methods work by amplifying the signal that is transmitted from your key fob to the vehicle's electronic control unit. With the latest anti-jamming technology and constant monitoring your vehicle will be protected from these sophisticated attacks.
Security Improved
A ghost immobiliser provides an additional layer of protection for your vehicle from theft. It works with an PIN code protection system that is operated by using buttons that are already on the steering wheel or on your dashboard which makes it difficult for thieves to access the device and take your vehicle. The device is also designed to be hidden inside your vehicle, without any other lights or signals that could signal a potential criminal to its presence. It communicates directly with the ECU of your car through the data bus. ghost immobiliser problems means it isn't vulnerable to relay attacks or hacking.
This system is a great investment for those who own high-end cars, since they are at a greater risk of theft due to their value and the popularity. Its enhanced security features protect against key cloning, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers are also integrated with apps, meaning you can arm or disarm easily. They can also be equipped with the option of a service/valet mode, which allows you to temporarily disable them while your vehicle is being repaired or serviced.
Ghost immobilisers have another excellent feature that it doesn't require any cutting of wire. This is a great option, particularly if your vehicle is newer and doesn't come with an immobiliser. Certain systems might also be capable of integrating with an GPS tracking device, providing additional security for your vehicle. A GPS tracker can also reduce your insurance rates. If you decide to purchase a ghost immobiliser make sure it's TASSA-certified and a professional installer installs the device for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to be compatible with all major makes and models of vehicles that will protect your vehicle from theft. It generates a unique pin code using buttons on your steering wheel, console or door panels. You must enter the code before you can drive. The system is secure and undetectable. It is also comes with a three-year guarantee. It is also fully certified by insurance companies This means that it can reduce your premiums.
The Ghost system is different from traditional immobilisers that rely on the key fob for ignition control. It connects directly to the engine controller via the CAN bus. This means it is secure from tampering, is nearly impossible to disable or remove and is not hacked by organised car thief groups. Additionally it is possible to use Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. ghost immobiliser review can be linked with an secure iPhone application that allows remote management and monitoring.
You can choose a PIN code that is simple for you to remember but mathematically, it is impossible for thieves to guess. You can customize and change the PIN at any time to protect your vehicle even if it's parked in a parking lot or on the street. You can also set a service or valet mode if you need someone who is not driving your car for a brief period such as when it's in the garage for servicing. This is an excellent way to stop your vehicle from being taken by a shady mechanic. To give you more peace of mind you can choose a Ghost call alert to inform you when your car is in motion or if it's moved.
Convenience
The ghost immobiliser is an efficient security device, protecting your vehicle from typical methods of theft such as key cloning and relay attacks. It works by connecting to the car's CAN network and blocking communication with the engine ECU. This makes it hard for thieves to hack or replicate your vehicle.
Once installed, you'll have to enter a pin number of up to 20 digits in length using the buttons on the dashboard and steering wheel to start the vehicle. The system is completely concealed and thus unnoticeable to thieves. It doesn't emit radio frequency signals. It is also able to be set to change the PIN of the user, which adds security. The system is designed to avoid cutting the circuit, making it nearly impossible to tamper.
Some systems allow you to connect directly to the immobiliser using an app on your phone to disarm it immediately when you forget your PIN. Some systems even have a valet/service setting that allows you to start your car, for instance, when you drop it off at a garage or valet park.
The Ghost Immobiliser is also indetectable to thieves because it does not transmit radio signals, a major benefit over other aftermarket car security systems. It is also simple to use, and doesn't require complicated wiring. It can be used combination with dash cams to provide additional security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be wired for optimal performance and longevity.
Installation
If you're looking to secure your vehicle from thieves it is important to select the right immobiliser ghost. This device can prevent car thefts by blocking communication between key fobs and the engine controller unit. This device blocks thieves from stealing the signal used to start your vehicle. It also detects the moment it has been altered with and alert the owner of the vehicle.
The device is simple to install and works with the existing systems of your vehicle. It doesn't require any modification to the vehicle wiring and can be installed in a concealed location such as under the dashboard. To ensure that the device is correctly installed, follow the instructions in the user manual. After installation, it's crucial to test the system. This will ensure that the immobiliser ghost works as intended.
You can buy an Autowatch Ghost 2 immobiliser and then have it installed by a certified installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to remove or bypass the system. The installation process generally takes between 2 and 3 hours.
When installing the Ghost, it is recommended to review the wiring diagram of the vehicle model you are using. This will help you identify the CAN High and CAN Low wires needed to connect the Ghost to the engine of your vehicle. Check all connections to make sure they are secure and insulated.
Once the installation is completed, you can use the Ghost Immobiliser during normal operation. It will turn off the ignition of your vehicle in the event that it is not started with the correct PIN, which you can assign yourself. The ghost cost of immobilisers can also be put into Service/Valet mode for times when you have to surrender your vehicle for servicing or valet parking.