The Ghost Immobiliser
Immobilisers are a potent tool to fight vehicle theft. They stop the vehicle from starting if it isn't equipped with an ignition key fob. They also help to stop hotwiring or other traditional forms of vehicle theft. However, newer techniques like key cloning and relay theft are becoming more widespread.
The Ghost Immobiliser is designed to fight these trends and make your vehicle unnoticeable. It is silent and stealthy and does not rely on key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network in your vehicle to stop key theft and cloning. It is a TASSA approved product, and insurance companies endorse it. It is silent and almost undetectable to thieves. It makes use of buttons on your steering wheel and center console to generate an individual pin-code sequence you must enter before you can start the vehicle. You can create up to 20 different sequences in order to increase security. The system is simple to set up and does not require any additional wiring or hardware.
It is recommended to use a reputable immobiliser CAN installer who is specialized in your particular vehicle model to ensure the most effective results. Ideally, they will have a workshop in your local area, allowing you to visit and have the installation completed. You will also find a range of tools and equipment that can assist you in the installation. They will have basic hand tools, multimeters insulation tape, and heat shrink tubing for protecting the connections. A user manual will give you the necessary instructions on how to wire your vehicle.
Disconnect the battery before beginning the installation to avoid short circuits or airbag deployment. Double-checking the CAN L and CAN H wires is crucial, as incorrect identification can cause a misalignment of the system. It is recommended to mark the wires with small pieces of tape or mark them. Make use of a multimeter to ensure that the power source is providing the same 12V.
Advanced thieves can use various tactics to bypass Ghost Immobilisers, including blocking or spoofing. These techniques work by amplifying the signal that is sent from your key fob to the electronic control unit in your vehicle. However, with the latest anti-jamming technology and vigilant monitoring, you can protect your vehicle from these sophisticated attacks.
Security Improved
Ghost immobilisers offer an extra layer of security to protect your vehicle from theft. It is an PIN protection system that can be entered via buttons on your steering wheel or dashboard making it difficult for thieves to steal your car. The device is also designed to be hidden within the vehicle, and is devoid of any other lights or signals that could alert a potential thief to its presence. It is directly connected to the ECU of your car through the data bus. This means it is not vulnerable to hacking or relay attacks.
This system is a great investment for those who own luxury cars, since they are at a greater chance of theft because of their value and their popularity. Its security features are enhanced to protect against key cloning, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers can also be paired with an app, allowing you can easily arm and dearm them. They can include a service/valet setting that allows you temporarily deactivate the immobiliser while your vehicle undergoes repairs or maintenance.
A ghost immobiliser has another excellent feature: it doesn't require any wire cutting. This is a good feature, especially if own a brand newer vehicle which does not come with immobiliser built-in technology. Some systems may also be equipped to work with the GPS tracking device, providing additional security for your vehicle. Having a GPS tracker can also help you reduce your insurance premiums. If ghost immobiliser problems decide to purchase an immobiliser that is ghost, make sure it's TASSA-certified and a professional installer installs the device for you.
Compatibility with all major makes and models
The Ghost Immobiliser is designed to work with all major brands and models of vehicle protecting your pride and joy against theft. It creates a unique pin code by pressing buttons on your steering wheel, console or door panels. You must enter this code before you can drive. The system is tamper proof unbreakable and comes with three-year guarantee. It is also fully approved by insurance companies. This means you can reduce your premiums.
Unlike the standard immobilisers, which use your key fob to control the car's ignition and ignition, the Ghost system is connected directly to the engine controller unit using the CAN data bus. It is virtually impossible to disable, remove or hack. Additionally, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be connected with an secure iPhone application that permits remote monitoring and management.
You can choose an PIN code that is simple for you to remember but mathematically difficult for thieves to figure out. The PIN can be customized and changed at any point and you can ensure your vehicle is safe even when you park it on the street or in a parking lot. You can also select a valet or service mode if you need someone else to drive your car for a brief period, for example when you're in the garage for maintenance. This is a great way to prevent your vehicle from being stolen by a scammer mechanic. To ensure your security, you can opt for a Ghost call alert which will inform you when your car is moving or it's been moved.
Convenience
The ghost immobiliser shields your vehicle from common theft methods like key relay or cloning. It works by connecting to the car's CAN data network and preventing communication with the engine ECU. This system makes it difficult for criminals to hack or copy your vehicle.
Installed, you'll need to enter a pin number of up to 20 digits long using the buttons on the dashboard as well as the steering wheel to begin the vehicle. The system is completely concealed and therefore unnoticeable by thieves. It does not emit radio frequency signals. It can be set up with a PIN code that can be changed by the user, adding to its security. The system is also designed to stop cutting of circuits and makes it virtually impossible to alter.
Some systems allow you to communicate directly with the immobiliser via an app on your smartphone, disarming it immediately in the event that you forget your PIN. Some systems also have a service/valet setting that allows you temporarily to start your car for example when you drop it off at valet or garage.
The Ghost Immobiliser is also unnoticeable to thieves as it does not transmit any radio signals, a major advantage over other aftermarket vehicle security systems. It is also easy to use and does not require any complex wiring. It can be used combination with dash cams to provide added security. Dash cams include the Thinkware F70, which features clear and crisp 1080p HD dashcam footage, Format Free Technology and parking mode. The system can also be hardwired for optimum performance and durability.
Installation
It is crucial to select the best immobiliser ghost to shield your vehicle from thieves. This device will prevent car thefts by blocking the communication between key fobs and the engine controller unit. This prevents thieves from intercepting the signal and then cloning your key fob in order to start your vehicle. It also can detect the presence of a tamper and notify the owner of the vehicle.
The device is simple to install and can be used with the existing systems of your vehicle. It does not require any modification to the wiring of your vehicle and can be hidden in a secluded location, such as under the dashboard. To ensure that the device has been correctly installed, follow the instructions in the manual for the user. After installation, it's important to test the system. This will ensure that the immobiliser ghost is working in the way it is intended.
You can purchase an Autowatch Ghost 2 immobiliser, and have it installed by a reputable installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to take it off or bypass the system. The installation process generally takes about 2 hours.
It is recommended to consult the wiring diagram of your vehicle prior to the installation process. This will enable you to locate the CAN High & CAN Low wires that are required to connect your Ghost to the engine of your vehicle. Check all connections to ensure they are safe and well-insulated.
Once the installation is complete and you are able to use the Ghost Immobiliser during normal operation. It will disable your vehicle's ignition if it is not started with the correct PIN code which you can create yourself. The immobiliser ghost can be set to Service/Valet Mode for when you require your vehicle to be serviced or valet parked.