How to Install a Ghost Immobiliser
Ghost immobilisers can be an effective deterrent to car thieves. By using this device in conjunction with other security systems and staying vigilant, you can put together a robust defense against modern, tech-savvy thieves.
A ghost immobiliser can protect your vehicle from hotwiring, key cloning, and relay car theft by needing a pin code to start the engine. It works by using buttons that are already present in your centre console or steering wheel, which means it's undetectable to criminals.
Identifying the Wires
It is crucial to safeguard your vehicle as more vehicles are stolen without the owners' key. While thieves might be able to copy your key fob or even steal your vehicle by hacking its system, a ghost immobiliser adds an additional layer of security by blocking all signals coming from the key fob and making it impossible to start your vehicle without entering a PIN.
You can install the ghost immobiliser your own, but it is recommended to hire a professional to do the job. A skilled professional will know the best place to place the unit and how to properly connect it to the vehicle's wiring. The process of installation can be complicated and it is crucial that all connections are made accurately to avoid damage or malfunctions.
To get the most effective results, you must be in a well-lit space and wear the appropriate safety equipment. You should also read through the user's manual and familiarize yourself with the wiring system. This will aid you in identifying the wires required for installation and ensure that you have the proper tools and equipment to complete the job properly.
After the wiring is connected, you can connect the battery and check the system to see if it is functioning properly. You should also make sure that the battery's connections are secure to prevent electrical problems. You should also label the CAN L and CAN H wires with labels or tape to be in a position to track them during the installation process.
If you want to allow someone else to drive your vehicle for a short period of time for valet parking or when the vehicle is being used for service, the Ghost Immobiliser can be set to Transport Mode. You can enter the code by pressing a service button on the steering column, central console or door panels. Then, the Ghost Immobiliser will enter PIN mode that allows for changing of the code.
Some thieves attempt to evade ghost immobilisers using jamming and spoofing devices that block or send fake messages to the system. This can be avoided by investing in modern anti-jamming technology, and by regularly checking your Ghost Immobiliser for indications of interference.
Disconnecting the Battery
The ghost immobiliser is a advanced security device, was designed to prevent car theft. It makes use of cutting-edge technology to monitor and disable the engine once the correct PIN code is entered, thereby stopping the vehicle from being driven away by thieves. The system is extremely efficient and stealthy, with no visible indicators to discourage criminals. However, there could be an occasion when you have to remove the device, whether for maintenance or upgrades, or to sell your vehicle.
This process requires specialized tools and knowledge since you'll be working with wires, and removing certain factory components. It is also essential to follow the step-bystep instructions given by the maker of the ghost immobiliser. It is recommended to seek advice from an expert mechanic or auto electrician particularly if you're not familiar with working on cars.
It is essential to assess your battery's condition after identifying and disconnecting the wires. Ensure that it is clean and free of corrosion and that the connections are secure. If needed, you may want to replace the battery to ensure that it is able to handle the electrical demands of an aftermarket security system.
After you have disconnected the wiring from the battery, you are now able to begin to remove the ghost immobiliser. Wire cutters or strippers are a good way to disconnect the wires. Be careful not to harm them or their terminals. Be sure to label each wire to ensure that you are able to reconnect them correctly in the future. If the wires were connected and you want to use a heat resistant tool to break the connection. It is also essential to insulate the cut wires with insulation tape or heat shrink tubing to keep them from short circuiting.
Connect the wires using the 12V constant power source. Use a fuse tap if necessary to secure the connections using a fuse. Then, connect the grounding wire to a solid grounding point on the vehicle's chassis.
Once you've reconnected the wires, turn off your vehicle and enter the PIN. Then, try to start the engine once more. If the engine doesn't start, then you have successfully removed the ghost immobiliser.
Making Connections
Ghost immobilisers are an affordable method to increase the safety and security of your vehicle. It connects to the CAN bus system inside your car, capturing signals, and stopping the vehicle from starting until the proper PIN code has been entered. This device is almost impossible to bypass. It's a great choice for those who want security and peace of mind. In combination with a Thatcham Approved tracking system, it can help reduce your insurance costs.
Reviewing and obtaining the wiring diagram for your vehicle model will be crucial in the process of installing. The diagram will act as a reference guide for locating the wires needed to create precise connections. The connection will be long-lasting and secure if you choose the proper wiring connectors or the proper soldering technique.
The wires that connect the Ghost immobiliser to the CAN bus system need to be identified and connected correctly. Use small labels or tape to label the CAN L and H wires. This will prevent confusion during installation. These wires are located differently on each vehicle. It is essential to reference the wiring diagram or online resources to determine the wires.
When the correct wires have been connected, the power to the Ghost immobiliser can be restored. It is a good idea to test the immobiliser by launching the engine and not entering the PIN code. This will ensure that the immobiliser is properly installed and functioning as intended. It is important to test your immobiliser on a regular basis. This will allow you to identify any problems or issues early.
Another benefit of the ghost immobiliser is that it can be set up in a matter of minutes and does not require any cutting or modification to your vehicle's internal wiring. It is a fantastic option for those looking to add more security to their vehicle because it can work in conjunction with a Thatcham approved alarm or tracker to send you a notification on your smartphone or tablet in the event that the vehicle is compromised.
Mounting the Unit
The Ghost immobiliser is an excellent deterrent to car thieves, especially when it is paired with a GPS tracking system. The device uses buttons on the centre console, doors, and steering wheel to create a unique sequence you are able to recognize. This stops your car from beginning. It is also weatherproof and tamper-proof. ghost immobiliser problems comes with a 3-year warranty and is recommended by a variety of insurance companies.
It is important to carefully follow the instructions during the installation process. If you're unsure about the installation, you should consult an expert. Wire strippers and multimeters are vital tools to determine the wiring and make precise connections. It's also an excellent idea to buy some electrical tape and insulation for protecting the connections from potential damage. It's a great idea test your device once the installation is completed to make sure that everything works as it should.
A Ghost immobiliser is a fantastic method to guard your vehicle from theft particularly in areas of high crime. It prevents key cloning, ECU swapping and other security risks, and can be linked to an iPhone application for simple management and monitoring. It's popular among vehicle owners who want to protect their investment.
The Ghost II immobiliser features a elegant design and low profile which makes it invisible to thieves. It connects to the CAN (Controller Area Network) system of your vehicle and prevents the engine from starting until a PIN code has been entered. The PIN code is generated by a unique sequence of buttons on the steering wheel, centre console or doors. It can be changed at anytime. The device is also tamper proof and comes with a GPS tracker that can help police locate your vehicle in the event of theft. It's a great choice to safeguard your car from thieves and is Thatcham-approved.